The ‘LEDifice’ is a professional and robust illuminated commercial bollard. It has a specially designed taller head in order to accommodate high output LED bulbs. The LEDifice is perfect for installations that need a high level of light. Ideal as amenity lighting for larger, commercial or public areas such as car parks or buildings. We recommend the included the 20W LED Corn Bulb for optimum brightness.
The inbuilt photocell dusk to dawn sensor automatically turns the bollard light on when it detects dark and off again when it detects light. Therefore, there is no need to remember to switch the fitting on and off manually, which results in less product maintenance. The E27 / ES bulb holder accommodates almost any LED bulb. Using LEDs is a very effective way to reduce energy bills.
The tubular bodies of Root mount bollards are different to a standard types. Extended tubes allow at least 400mm to be concreted in-ground, without losing any height above ground. A strong mounting bar inside the tubular body acts as an anchor when set into concrete. There is an optional secure cable outlet. This allows easy wiring after fixing the bollard in place.
The clear, high quality UV stop PC diffuser surrounding the centre section of the head, enables an even all-round light dispersal. This also adds protection to the bulb installed. Silver aluminium louvres act as anti-glare shields and give further internal protection. The bollard head and cylinder are 2.5mm thick heavy duty die-cast aluminium. All screws are stainless steel, resulting in a completely rustproof and non-corrosive model.
In a matte garden green or graphite black finish, a choice of height is available (600mm, 800mm or 1000mm) – a height suitable for every application such as driveways, paths and sectioned areas. There are also 3 styles of head to choose from: ‘domed’, ‘pillar’ or ‘flat’ top.
NOTE: The overall bollard height may be up to 7cm taller than the standard height due to the larger bollard head. This may vary depending on which tubular body is installed.
Bollard lights are available in a variety of styles, finish and lamp options. You need to think about how the light will be used for example a small garden pathway, the main driveway or to illuminate steps etc. If you are within 20 km of the coast you should think about using the Wooden, Copper, Iron, Brass or Marine Grade 316 Stainless Steel. Some bollards have built in LED modules which generally offer lower levels of light (lumens) than a standard LED GU10 lamp. Also, it is likely the LED module is a sealed unit and an integral part of the bollard which cannot be replaced if it fails meaning you will have to purchase a complete new bollard. There are bollards that use GU10 LED lamps and E27 base LED lamps. The spacing of bollards will depend on the type of bollard, louvre design, height and lamp output etc but a general rule of thumb would be no less than 3 meters and no more than 12 meters apart. The shorter distance would be for garden pathways and the longer distance for long driveways.
The colour of a lamp is defined as a measurement called kelvins. A standard GLS incandescent bulb in the home would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum.
|Voltage:||220 - 240v|
|IP rating:||IP 65|
|Materials:||aluminium / polycarbonate|
|Height:||800mm above ground, 1000mm above ground, 600mm above ground|
|Dimensions:||185mm x 64mm of LED Lamp|
|Sensor_Description:||Photocell (Dusk til Dawn)|
|Material Finish:||316 Stainless Steel|
|lamp life:||30,000 hrs|
|colour temperature:||3000k Warm White, 6500k Daylight white|
|mounting:||In-Ground Tubular Root Mount System|
|additional information:||instructions/Allen key|
|Head Choice:||Domed LEDifice, Pillar LEDifice, Flat|