01689 606342

Smart spike 60, mains 240v, GU10, solid copper

The Smartspike 60 copper spike light is a stylish spotlight, ideal for use in any garden or outdoor space to highlight, plants, trees or statues. The high quality solid copper body provides added durability to this IP65 outdoor spot light, being highly weather resistant.

This Smartspike 60 is supplied with approx. 5m of 3 core H05RNF cable. This longer cable length gives the option of a 10m space between two lights should it be needed, and could cut down the number of cable joins in outdoor lighting installation. Light can also be spread to a wider area with longer cable length.

Lamp colour ( Kelvins )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees.  When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour                    temperature to match.      


All exterior lighting products on our website have an IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable joints. All joints must be made 100% water tight and this can be done using IP68 inline connectors, waterproof junction boxes which are then filled with a resin or gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas.

Item Specifications

colour: Natural Copper
Voltage: 220 - 240v
Max wattage: 35W, 35 Watt
IP rating: IP 65
Suggested accessories: 250mm Extension rod included, None, 500mm Extension rod included
Degree of tilt: 90
Material: copper
Material Finish: Natural Copper
Bulb Type: GU10
diameter: 60mm
cabling: 5m of H05RNF cable
Warranty: 2 Years