01689 606342

Cubik  Stainless Steel 100mm or 200mm Square Top Recessed Light - 12v - Open ended cable

Low Voltage Garden Lights

The 12v 'Cubik is a square topped 304  stainless steel recessed light with a protective hard abs sleeve. It is ideal for in ground installation, adding a touch of light and edging to areas of the garden, patio or driveway, whether being mounted into block paving, decking or any other materials. The versatile Cubik can also be used as a recessed wall light, or as a step light. The smooth, stainless steel finish creates a modern and streamline look which is highly durable and corrosion resistant (Rated IP67).

      Not for use in areas prone to waterlogging or flooding


Installation 12v

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay-based soil areas. If possible, use ground surface spike lights rather than a buried light.  Care must be taken with the cable runs and not to install transformers more than 30 metres away from the furthest fitting to avoid any voltage drop. Cabling should be 2 core Rubber HO5RN-F or HO7RN-F and not PVC. PVC leads to capillary action over time especially with UV degradation. Always check the correct type of transformer you need for your fittings. We recommend wiring in parallel with Toroidal AC and LED DC drivers. But when using Milliamp mA LED drivers, they should always be wired in series. Plug and Play kits are simply a case of daisy chaining the fittings via plug and play junction boxes, connectors and extension cables using a 2-pin plug arrangement. 

All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.

Item Specifications

colour: stainless steel
Voltage: 12v
Max wattage: 35W
IP rating: IP 67
Materials: Stainless Steel / Aluminium / Durable Plastic
Dimensions: 100mm x 100mm x 5mm (Top) 114mm Casing Length
Material Finish: Stainless Steel 304
Bulb Type: MR16
cabling: 2 Core 0.75mm² H05RN-F Rubber Cable (3m), 2 Core 0.75mm² H05RN-F Rubber Cable (1m)
lens: Toughened Glass, Clear lens, Toughened Glass, frosted lens
additional information: Casing length 114mm
Bezel: 100mm, 120mm
Warranty: 2 Years, 1 year warranty period for cable