01689 606342

Decimax – 12v Recessed Light – Stainless Steel (304) – 12v Plug & Play or with open ended 12v cable


The ‘Decimax’ 12v deck light or recessed light has a 100mm or 120mm round front bezel. Made from corrosion resistant 304 stainless steel, the Decimax has a contemporary look which will complement any modern environment. A hard protective sleeving adds to the durability of the fitting. The sleeving protects the lower section of aluminium which mounts into brick (driveway or wall), decking or the ground. There are Clear or frosted lens options.


Lamp colour ( Kelvins )


The colour of a lamp is defined as a measurement called kelvins. A standard GLS incandescent bulb in the home would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. 

                                                                

Installation 12v

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay-based soil areas. If possible, use ground surface spike lights rather than a buried light.  Care must be taken with the cable runs and not to install transformers more than 30 metres away from the furthest fitting to avoid any voltage drop. Cabling should be 2 core Rubber HO5RN-F or HO7RN-F and not PVC. PVC leads to capillary action over time especially with UV degradation. Always check the correct type of transformer you need for your fittings. We recommend wiring in parallel with Toroidal AC and LED DC drivers. But when using Milliamp mA LED drivers, they should always be wired in series. Plug and Play kits are simply a case of daisy chaining the fittings via plug and play junction boxes, connectors and extension cables using a 2-pin plug arrangement. These Plug and Play fittings should only be used for small domestic projects due to voltage drop over 5 metres.

All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.


Item Specifications

colour: stainless steel 304
Cut out: installation hole size 87mm
Installation depth: 114mm
Voltage: 12v
Max wattage: 35W
IP rating: IP 67
Materials: Stainless Steel / Aluminium / Durable Plastic
Dimensions: 100mm diameter, 5mm thick (Top), 114mm Casing Length
Material Finish: Stainless Steel 304
Bulb Type: MR16
diameter: 100mm, 120mm
cabling: 2 Core 0.75mm² H05RN-F Rubber Cable (3.0m)
lens: Toughened Glass, Clear lens, Toughened Glass, frosted lens
shape: circular
additional information: Casing length 114mm
Warranty: 2 Years
Plug Type: None, VERSA – 3m Plug & Play (2 pin) – male, VERSA – 5m Plug & Play (2 pin) – male