01689 606342

Adjust Fixed round ground buried, GU10, 304 stainless steel cover, IP67, 5 ton loading


Made in Germany this quality ground buried up light has an aluminium body and a 304 stainless steel top cover. High IP rating of IP67 ensures a water tight luminaire. Comes complete with ground mounting pot. This fitting can be used as a drive over light as it takes a total 5 ton loading based on a concrete installation.
The round recessed ground up light uses a mains GU10 LED lamp and is safe to touch, it will also use a small amount of electricity and last a long time.


Lamp colour ( Kelvins )

 

 The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees.  When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match.  


Installation 

Please check the specification for dimensions before purchasing.

 It is important that adequate drainage is allowed for when installing this type of product especially in clay based soil beds.    

 A NIC EIC electrical contractor should be used to ensure a 100% water tight installation. There are resin kits, magic gel and heat shrink kits available from us to help make the perfect waterproof joint.

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our Technical Help/Products section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable joints. All joint must be made 100% water tight and this can be done using heat shrink kits, waterproof junction boxes which are then filled with a resin mix or magic gel. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas.   Mains 240v cable will have less joints than a low voltage installation but care must be taken with the cable runs.


<

Item Specifications

colour: stainless steel
Cut out: dia 12 cm
Installation depth: 12 cm
Weight: 1.070 kg
IP rating: IP 67
Materials: aluminium / stainless steel 304
Length: 13.5 cm
Width: 13.5 cm
Material Finish: Aluminium / Stainless Steel 304
watts: Max 35w
shape: circular, Square bezel
Warranty: 2 Years