The Elipta Compact twin wall spotlights are 240v models and are compatible with GU10 energy saving LED bulbs. It has flush lenses which shed water and dirt and are easy to clean. Unscrewing the front bezel makes it easy to extract and change the lamp without tools. Made from Copper to give a superior look and feel to your garden setting. Copper and its principal architectural alloys are relatively active metals which, when left unprotected, tend to oxidize (weather). which darkens them and Long term atmospheric exposure generally results in the formation of the naturally protective grey-green patina.
Compact twin wall spotlights are ideal for mounting above french windows to provide threshold lighting or down lighting patio areas from house walls with 2 x 5w LED lamps.
Solid metal spotlight bodies mount onto a central boss and gasketed back plate which incorporates terminal block connection space. Knuckle joints allow spot lamp adjustment in any combination of downward, upward or outward directions. The central boss revolves on the back plate and is secured by grub screws at the side for inconspicuous fixing combined with adjustable positioning.
All outdoor lighting should be installed by a certified PART P, NIC EIC electrical contractor to ensure a safe and water tight installation.
Back plate screws to wall: body mounts onto the back plate with discrete allen key grub screws at the side of the body for screw less frontal appearance. Body can be rotated on back plate before fully tightening grub screws to ensure fitting is installed level, or at any other angle required. Grommeted rear cable entry. Silicon seal back plate fixings.
Choosing the style of a product is only part of the equation you must also think of where that product will be used and how
it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our
design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application
and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only
as good as the installation as the weakest point is always cable joints.
The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees. When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match. Coloured filters are good to use with the LED bulbs too especially in winter using green filters give the appearance the trees are still in leaf.
|colour:||stainless steel, Black, Copper|
|IP rating:||IP 65|
|Material Finish:||Natural Copper|