01689 606342

Elipta, adjustable, garden spot wall light, copper, 12v - MR16, IP66

Requires a transformer

E4221L Elipta Compact outdoor wall spotlight is an adjustable 12v wall or post mount spotlight for downlighting and accent lighting focal points. 12v models operate from a remote transformer. These garden spotlights take a range of 3 watt or 5 watt LED lamps to achieve a variety of garden lighting effects: 35w Powersaver lamps may be used to save energy while achieving the performance of first-generation 50w halogen lamps which run much hotter and are much less efficient. 3 watt lamps are usually ideal for downlighting from a pergola or in a gazebo; 5 watts is an optimum choice for many accent lighting applications to pick out individual features. 3w or 5w led lamp provides a low energy option for lighting smaller subjects. It has a flush lens which sheds water and dirt and is easy to clean. Natural copper which weathers to a mottled brown finish which blends well with red brick and timber.   Longer body shields the lamp from view, accepts greater number of MR16 lamps with space for colour filters and clip on lens.

 Body length:  100mm
Diameter     : 65mm
Colour/Finish: Natural copper
IP Rating: IP65
Construction: The spotlight body is made from solid metal tube and is mounted on an adjustable knuckle joint and 75mm diameter enclosed mounting base with back plate, grommeted rear cable entry and connection terminals. Unscrewing the front bezel makes it easy to extract and change the lamp without tools.
Input Voltage: 12v volts - requires power from a remote transformer
Lamp Type: MR16 3w or 5w white or warm white led lamp - Order lamps separately
Installation: Screw back plate onto wall, post or Besa box. Seal wall fixing holes with silicone sealant. Wire to transformer with 1.5 mm² or 2.5mm² ground burial 2 core low voltage cable available in 50m or 25m packs.

A wide selection of beam angles are available for the lamps to create the effect you require and can be used with the very latest LED lamps to help reduce maintenance cost's and energy bills.

LED energy saving example



Please ensure that you use a PART P, NIC EIC electrical contractor to install your exterior lighting.

Care must be taken when installing exterior lighting products especially those that are ground mounted. All the products are sold and tested fit for purpose and the IP rating is set according to the design and purpose of the luminaire, more details on IP ratings can be found under design ideas section. The weakest point is generally the installation of the product where adequate drainage has not been made for ground buried lights or poor cable joints have been made which are not 100% water tight and will allow for water penetration. There are a number of waterproof enclosures available on this site along with heat shrink cable joint kits and resin gel packs to fill the junction boxes to make a watertight enclosure. Where possible try and keep all joints and transformers above ground, however if this is not possible there are potted burial kits available.Copper grease should also be used on screws and nuts to stop them binding and ease removal at a later date when a lamp change is required.

Low voltage transformer guide


Lamp colour ( Kelvins )

Lamp colour is determined by the Kelvins and a lamp which is  2,700 kelvin  is classed as warm white and sympathetic to skin tones and warm colours like red brickwork or yellows etc. A lamp with a kelvin rating of kelvin of 6,500k is in the  blueish white spectrum and works well against a white background and cooler colour brick work and will appear brighter to the naked eye than the warm colour spectrum. Plants and shrubs work better with a warm spectrum from 2,700k up to 4,000k max.

Kelvin colour chart


Light output ( Lumens )

All lamps have a lumen number and the higher the lumen number the brighter the lamp, however colour of the lamp (kelvins ) also comes in to play here as a whiter lamp at 6,000 kelvins and above would always appear brighter to the naked eye than a warmer colour lamp at the 2,700 kelvins light spectrum even if it has the same lumen output.  A halogen 150w R7 lamp that is used in a standard garden security flood light would produce around 2,300 lumens and a 26w compact fluorescent would produce around 1,800 lumens.  Placing lights closer to the item to be illuminated is a good way of using a lower lumen lamp rather than trying to flood light a big area. LED lamps are now used extensively in the garden and for indoor applications and the only way you can compare light output is by the amount of lumens each lamp produces rather than the old way of going by the wattage of a lamp. For example you can get a 3w LED lamp with 400 lumens and a 5w LED lamp of inferior quality may only produce 300 lumens.

Environmental impact

Care should be taken for local wildlife, insects, and general light pollution,  this means the warmer colour spectrum does not interfere with insects and general wildlife as much as the blue spectrum of light which can disrupt their  normal night time activity, This also applies to bats where a anti glare light fitting works better as well as reducing overall light pollution in the area.                                   



Tubular metal spotlight body is mounted on an adjustable knuckle joint and 65mm diameter enclosed mounting base with back plate, grommeted rear cable entry and connection terminals. Unscrewing the front bezel makes it easy to extract and change the lamp without tools.

Item Specifications

colour: Black, Natural Copper, Rustic Brown, stainless steel 316
Voltage: 12v, 220 - 240v
Dimensions: 92mm x 63mm
Warranty: 5 year on the body