01689 606342

Dasar Square GU10, ground recessed,

304 stainless steel cover, 30 degree tilt, IP67

The Dasar Square GU10 is an aluminium body fitting with a 304 stainless steel top cover, designed for exterior ground use and is IP67.
It's used with a GU10 LED lamp so the fitting is safe to touch and ECO friendly. There is a black ground potting pot included with the fitting.This fitting can take a maximum load of 2 tons provided it is installed into concrete and can be used as a drive over light. There is also 30 degree of tilt angle available in this ground light.

The fitting is 12cm in length and 7cm in diameter and the square stainless steel bezel is 13cm in length and 13cm in width.

The cut out is 12.4cm x 12.4cm and to accomodate the black pot which can be used also as the template for the installation.

It is mains 230v and has a 90 degree rotation.

LED lamps will create a good deal of lumen brightness and have a long life, use minimal electricity and are cool to touch, making them safe around children.

Energy efficient lamps

Choosing the right lamp is a combination of 3 main factors, Lumen's, Kelvins and efficiency. Efficiency matters because you want the maximum light output possible  (Lumen's) from the minimum amounts of watts consumed. Kelvins are the colour temperature of the lamp. 2700k is the warm end of the colour spectrum and 5000k is the cooler whiter end of the colour spectrum.  An example would be to change a mains halogen GU10 35w lamp to a ECO friendly GU10 5w LED lamp.

Example of LED lamp savings

Lamp colour ( Kelvins )



Please check the specification for dimensions before purchasing.

It is important that adequate drainage is allowed for when installing this type of product especially in clay based soil beds.
A NIC EIC electrical contractor should be used to ensure a 100% water tight installation. There are resin kits and heat shrink kits available from us to help make the perfect waterproof joint.

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable joints. All joints must be made 100% water tight and this can be done using heat shrink kits, waterproof junction boxes which are then filled with a resin mix or magic gel. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas.


The installation pot is included 
Maximum load: 2 tons

Item Specifications

colour: stainless steel
Cut out: 12.4 x 12.4 cm
Installation depth: 13.5 cm
Weight: 1.150 kg
IP rating: IP 67
Materials: aluminium / stainless steel 316
Length: 13 cm
Width: 13 cm
Height: 12 cm
Degree of tilt: 30
Material Finish: Aluminium / Stainless Steel 316
Bulb Type: GU10
watts: Max 35w