01689 606342

Deltech - 240v - Black - 10w IP65 Cool White 6000k 800 lumens - Floodlight With PIR            

Very low energy security flood light with integral PIR which is adjustable for tilt and rotation.

Designed to replace the traditional 80w halogen flood light with a massive energy saving, instant start and long life. The cool white lamp is around 6,000 kelvins to 6500 kelvins and ideal as a security light.

The fitting comes complete with its own wall bracket which enables the light fitting to have a degree of tilt. Covers 5 meters.

The shape of the internal reflector means it throws a symmetrical wide beam of light and must be angled down to avoid any direct glare or upward light spill.


Lamp colour ( Kelvins )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees.  When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour                    temperature to match.      


All exterior lighting products on our website have an IP rating which is explained further in our Technical Help/Products section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable joints. All joints must be made 100% water tight and this can be done using IP68 inline connectors, waterproof junction boxes which are then filled with a resin or gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay based soil areas



Item Specifications

Colour: Black
Voltage: 240v
IP Rating: IP65
Materials: Aluminium
Width: 152mm
Height: 110mm
Sensor: PIR
Lumens: 800 lm
Bulb Type: Integral LED
lamp life: 30,000 hrs
Colour Temperature: 6000K
Watts: 10W