01689 606342

Francis post IP44 6W cool white floor - brushed stainless steel 220 - 240v


This outdoor LED post light comes in a brushed stainless steel finish. Its IP44 rating means that it is suitable for outdoor use, and the LEDs offer high light output with low energy consumption. Matching items available
  • Brushed stainless steel & frosted pc
  • Constructed from stainless steel (304) & polycarbonate
  • Complete with integrated control gear
  • 6W LED module (SMD 5050) Daylight White (Included)
  • K: 6500 Lm: 420 Lm/W: 70
  • IP44
  • H: 450mm Dia: 180mm
  • Class 1
  • 2+1YR Extended Warranty
  • Weight: 0.9 Kg




 

Lamp colour ( Kelvins )


The colour of a lamp is defined as a measurement called kelvins. A standard GLS incandescent bulb in the home would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum.

         Installation 220 – 240v

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay-based soil areas. If possible, use ground surface spike lights rather than a buried light.  Mains 240v cable will have less joints than a low voltage installation but care must be taken with the cable runs. Cabling should be Rubber Butyl and not PVC. PVC leads to capillary action over time especially with UV degradation.


All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.

                       

Item Specifications

colour: stainless steel
Weight: 0.9kg
Voltage: 220 - 240v
IP rating: IP 44
Height: 450mm
Lumens: 420 lm
Material Finish: Stainless Steel 304
Bulb Type: integral LED
diameter: 180mm
watts: 6w
colour temperature: 6500k Cool White
Warranty: 2 Years