Navigator eye,12v, 1w led step light, 316 stainless steels, warm white, IP67
( Requires a 12v transformer )
The E3411WW is a low energy, high output warm white LED deck and recessed light which consumes a small amount of power and stays
cool to the touch. The warm white LED produces a wide 80° beam diffused by the 28mm diameter frosted lens to provide soft
lighting compatible with the colour of halogen garden lighting. Install it to light across individual steps or in a wall
about 40cm above a patio or deck.
a deck or patio space with a distinctive shape, start at the corners of the decking or paving and space LED recessed garden
lights at about 1 - 1.5m apart.
Kelvin Colour chart
Please check the specification for dimensions before purchasing
The installation of exterior
lighting is generally the weakest point and it is therefore imperative that the installer
has previous experience of installing the lighting system. All joints must be 100%
water tight and where possible keep all transformers above ground. Heat shrink kits
and resin filled boxes are available from our web site to complete a good waterproof
installation. Ensure that your installer is NIC EIC certified and has done exterior lighting before.
A guide to lighting steps
life high-output LED resin-encapsulated behind a frosted glass lens
in a stainless steel case. The case has a spring mount which locates the
light in a sleeve used to prepare positions in concrete, paving or
walls. They can be recessed without the sleeve in decking sleeper walls
and other materials using a 44mm hole saw. Diameter 60mm (sleeve 48mm;
44mm cutout without sleeve); recess depth 75mm.
12v 1.5w: NAVIGATORS should be powered by 12v dc power supply. Do not use an electronic transformer to power Navigator led
lights. If powering from a 12v ac wire-wound transformer, ensure transformer is loaded to at least 75% of nominal rating.
Example of 12v transformer loadings
Lamp type1w Luxeon warm white led. 1.5w total.
InstallationMUST BE WIRED IN PARALLEL
please ensure the transformer has the correct loading.
Navigator lights can be arranged in custom layouts using cable joint
kits and 1.5mm cable, which is more flexible than kit-type products.
Connect to the end of a low voltage cable using T9962 cable joint kit;
for splicing into a run of cable use T9963 cable splice kit.