01689 606342

Odyssey spike light, IP44, 35W, mains GU10 fitting (8mm screw thread for spike attachment)

The Odyssey spike has a short spike length and is designed to be used low to the ground for up lighting etc, if you require a taller spike light to shine down in to flower beds or illuminate steps etc then the smart spike product range would suit this requirement better.

The Oddysey range gives a stunning designer look at an affordable price. This premium range of solid stainless steel exterior lighting offers the best in design and luxury. Made from 304 stainless steel which is ideal for any property not near a coastal environment. A short stainless steel spike is included with an adjustable knuckle joint head for rotation and tilt. The spike light can be used for a variety of situations from creating accent in a flower border to highlighting specific garden ornaments. Can also be used to up light small trees. Ideal as a feature light and for ground level pathway illumination. This fitting also comes with a pre wired 3mtr length of flex.

Example of Energy efficient LED lamps

Lamp colour ( Kelvins )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees.  When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour temperature to match. Coloured filters are good to use with the LED bulbs too especially in winter using green filters give the appearance the trees are still in leaf.




Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have a IP rating which is explained further in our design ideas section but in simple terms the IP rating is appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation as the weakest point is always cable joints. All joint must be made 100% water tight and this can be done using heat shrink kits, waterproof junction boxes which are then filled with a resin or gel mix. All joints where possible should be made above ground for easy access and reduced water ingress.  If possible use ground surface spike lights rather than a buried light.  Mains 240v cable will have less joint than a low voltage installation but care must be taken with the cable runs.

All exterior lights must be installed by a certified NIC EIC electrical contractor and all cable joints must be 100% watertight. There are a selection of waterproof jointing
 kits and boxes available on this web site.

Item Specifications

colour: stainless steel 304
Weight: 1.08kg
Voltage: 240V
Materials: Constructed from stainless steel (304) & glass
Height: 260mm
Material Finish: Brushed stainless steel & clear glass
Bulb Type: GU10
diameter: 63mm
Guarantee: 2 years