The elegant anodised aluminium 'Pergolux' is a contemporary 12v hanging light, with a fixed, clear 60mm tempered glass lens. A great example of a hanging garden spotlight, the 'Pergolux' is more weatherproof than others available (IP54) because of the glass lens which protects the bulb. For this reason it is ideal for anywhere in the garden where light is required from above, such as a seating area, certain trees or BBQ areas. The satin silver finish of the anodised aluminium really adds a contemporary quality to the light too.
Lumena recommend an MR16 LED bulb to reduce running and maintenance costs helped by the bulb's long lifespan and low wattage. The LED MR16 can be fitted / replaced easily if ever required by unscrewing the one screw at the top of the cylindrical body. The 'Pergolux' 12v garden light looks fantastic once illuminated, providing a spotlight beam that disperses outwards and downwards as the light hangs. The 'Pergolux' hanging light also looks great as a piece of ornamental landscape lighting during daylight hours.
For instant coloured lighting effects why not fit a removable coloured dichroic lens inside the light ? Available in a variety of colours from the accessories sub category louvres & filters.
Landscape lighting installation is made easier with this hanging garden light as a handy 5m of waterproof 2 core cable is supplied, meaning less cable joins and more choice on the position of the light fitting. The fixed hanging ring at the top of the light can be used with a length of chain if desired.
Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay-based soil areas. If possible, use ground surface spike lights rather than a buried light. Care must be taken with the cable runs and not to install transformers more than 30 metres away from the furthest fitting to avoid any voltage drop. Cabling should be 2 core Rubber HO5RN-F or HO7RN-F and not PVC. PVC leads to capillary action over time especially with UV degradation. Always check the correct type of transformer you need for your fittings. We recommend wiring in parallel with Toroidal AC and LED DC drivers. But when using Milliamp mA LED drivers, they should always be wired in series. Plug and Play kits are simply a case of daisy chaining the fittings via plug and play junction boxes, connectors and extension cables using a 2-pin plug arrangement.
All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.
|IP rating:||IP 54|
|Materials:||Satin Silver - Anodised Aluminium|
|Suggested accessories:||None, 30cm Hanging Chain & 2 x Split Ring (316 Stainless Steel), 50cm Hanging Chain & 2 x Split Ring (316 Stainless Steel)|
|Dimensions:||Length: 160mm (inc ring), Diam. (main body): 60mm, Diam. (top): 90mm|
|cabling:||12v 2 core 0.75mm2 H05RN-F (approx. 5m)|