01689 606342

 Pole spike solo, 316 stainless steel, 12v, MR16 lamp, IP65

Elipta's E6311S 12v Pole Spot Solo is a single pole-mounted outdoor spike spotlight ideal for uplighting trees and taller shrubs from amongst medium-height planting, spotlighting features at ground level or washing light across a lawn, path or gravel area. Fully adjustable knuckle joint, IP65 rated and prewired with twin core 1.5mm HO7 RNF rubber cable.
Also available in Black, Rustic Brown and Copper.
There is space inside the spotlight body to fit an E4010 honeycomb glare louvre or a clip-on MR16 frosted lens or colour filter accessory onto the front of the lamp. A flush glass  lens sheds water and leaf litter and is easy to clean. 30cm extension stems are available to increase the total height to 70cm or 1m, for which the E6002 High-stability Ground Spike is recommended.

Pole Spot Solo is supplied with a 30cm poly carbonate spike mount, which can be removed and replaced by a surface/deck mount R3510B and the high-stability E6002 Tri-Spike which provides firm positioning in loose soils order required mount separately.

Ideal to spot light items of interest in the garden like small shrubs, ornaments, trees and pathways. Can be used on the wall without the spike to illuminate a garden patio area or BBQ. 

Lamp colour ( Kelvins )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as white walls or to accentuate grey blueish foliage in shrubs and small trees.  When you buy a new, energy efficient bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour                    temperature to match. 

Installation 12v

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay-based soil areas. If possible, use ground surface spike lights rather than a buried light.  Care must be taken with the cable runs and not to install transformers more than 30 metres away from the furthest fitting to avoid any voltage drop. Cabling should be 2 core Rubber HO5RN-F or HO7RN-F and not PVC. PVC leads to capillary action over time especially with UV degradation. Always check the correct type of transformer you need for your fittings. We recommend wiring in parallel with Toroidal AC and LED DC drivers. But when using Milliamp mA LED drivers, they should always be wired in series. Plug and Play kits are simply a case of daisy chaining the fittings via plug and play junction boxes, connectors and extension cables using a 2-pin plug arrangement. 

All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.

Item Specifications

colour: Black, Natural Copper, Rustic Brown, stainless steel 316
Voltage: 12v
IP rating: IP 65
Materials: aluminium
Height: 400mm
Material Finish: Aluminium
Bulb Type: MR16
Warranty: 5 year