01689 606342

Power trail lite, warm white, 3,000 kelvin, LED 1w, 316 stainless steel, 90 lumens

suitable LED driver 350 ma: Code number: 464108

Small but powerful 90 lumen, 1 w LED unit with 60 degree beam angle. and made with 316 stainless steel.  316 marine grade stainless steel is ideal for properties in a coastal environment.
Used as a marker light due to the wide beam distribution so would work well in a patio or concourse area. Comes complete with the lamps but requires a driver unit.  Be aware of the wattage loading when connecting together. These LED's ahould be wired in series.

Lamp colour ( Kelvins )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting the right colour temperature of a lamp does matter as the warm coulour wavelength helps to soften skin tones and gives a warm soft relaxed feel and at the other end of the scale a 4,000 to 6,000 kelvin lamp colour  would be used in offices or a fast food restaurants to make you feel less comfortable and relaxed and more alert. There‚Äôs nothing that can sour your opinion of a compact fluorescent  or LED lamp like buying a 4000K or 5000K bulb when you meant to buy a 2700K bulb, or vice-versa. When you buy a new, energy efficient bulb, keep your application and color scheme in mind and make sure to buy the bulb with a color temperature to match.



The power LED requires a driver unit to run them

All recessed luminaires must have adequate drainage beneath each fitting to allow water to disperse, especially in clay based soil beds. All cable joint must be 100% watertight and there a number or waterproof transformer boxes and heat shrink cable joint kits on our web site to choose from. We would advise that all connections and transformer be kept above ground where possible as the weakest link in any exterior garden electrical installation is joining cables together.Magic gels and resin compound kits will ensure a 100% waterproof enclosure for the cable joints.

Please ensure that your electrician is NIC EIC certified and has done exterior lighting installations before. Also ensure that all rubber gaskets are clean and dry before screwing down the front glass and bezel for a water tight seal. We would suggest you use a copper grease on the fixing screws to reduce corrosion and make life easier when you need to remove the bezel.

Not all LED lights are wired the same please check instructions.


IP Rating

All the luminaires on our web site have been specifically designed fit for purpose and assigned a relevant IP rating which denotes the amount of protection that is required from water and dust. More information on IP ratings can be found in the design ideas section on this web site.


Low maintenance costs    
Energy efficient product    
LEDs with cool running temperature    
Low energy consumption, high light output
Comes complete with 200 cm connection lead
Connection of several led modules is made in series w

Item Specifications

colour: stainless steel
Cut out: dia 4 cm
Installation depth: 9 cm
Overall diameter: 4.1 cm
Weight: 0.290 kg
IP rating: IP 67
Suggested accessories: 464108, 464110, 229260
watts: 1w
colour temperature: 3000 Kelvin