FREE UK MAINLAND DELIVERY WITH ORDERS OVER £150 Inc VAT

Pro Solar SOL-ICON – Two Sided PIR Black Solar Path Light in warm white or cool white LEDs

  • £389.40 Inc VAT
Quickfind: 2870   •   SKU: ICON800-D
In stock

The Pro Solar SOL-ICON has a control button which selects the mode for the corresponding side of 10W LEDs (1000 lumens per side total 2000 lm).A PIR is also located each side. Combination of dusk to dawn, PIR and off.

Untitled Button
-
+
Delivery within 2 days

Pro Solar SOL-ICON – Two Sided PIR Black Solar Path Light in warm white or cool white LEDs


The Sol-Icon PIR Solar Path Light is a very unique design. Not only is it super slimline, it is also a two sided path light, designed to illuminate in both directions independently. From a sideways view, the path light is almost non-existent. Each side has a control button which selects the mode for the corresponding side of 10W LEDs (1000 lumens per side – total 2000 lm). A PIR is also located on both sides which are triggered individually and illuminate the LEDs on the relevant side.

A combination of the following modes can be selected on each side: PIR mode, constant low level (dusk to dawn) and off.

Their mounting position will determine which mode is the best option.

The high quality monocrystalline solar panel is also double sided. The main benefit of this is that when the sun moves around it will always shine on one side of the solar panel for optimum charging. Set in 2 layers of toughened glass, the integrated solar panel is extremely robust with an IK Rating of IK08. The one solar panel charges the replaceable LiFePO4 lithium batteries, which, in turn, power both sets of LEDs. The batteries will retain their charge for even longer when only one set of LEDs are in use. Each side accommodates 10W long life LEDs with a high lumen output of 1000 lumens. When both sets are illuminated, this generates a huge 2000 lumens output. Both warm white and daylight white options are available.

MODES

  1. PIR Mode – Full brightness when PIR triggered, then returns to 15% brightness after 20 seconds of no movement
  2. Constant Light (dusk to dawn) – Constant illumination at 50% brightness
  3. Off

The Sol-Icon Solar PIR Path Light is both easy and safe to install. The multiple mounting options and lack of wiring also make it very versatile when it comes to positioning. Eco Solar lighting converts natural energy into electrical current, with the added benefit of it being completely free to run.

Note, although the Pro-Solar Range incorporate high quality technology, on particularly dull days the fittings may not charge to their highest capacity. As a result, illumination is not guaranteed throughout the entire night, but highly likely on sunny days.

Wattage 2 x 10w LEDs SMD 3030 (40pcs) LED Chips

Colour Temperature (kelvins) Daylight White – 6000K or warm white 3000k 
Lumen Output - 2000 lm.  Sensor range 160 Degrees  2-8 metres distance.
Illumination area - Approx 6m (both sides illuminated)   Illumination Time Up to 4 nights on PIR mode (from full charge) Illumination time will increase if only one side of the LEDs are used.

LED Expected Life Up to 50,000 hours  Wattage Approximate Equivalent 42W CFL / 125W Incandescent 

Sensor Photocell (Dusk to Dawn) , PIR (Motion Sensor) IP Rating IP65
Battery Type 6.4v 6AH 38.4wH LifePO4 Lithium Battery (26650) – REPLACEABLE 2000 fully charged / discharged cycles (up to approx. 5 year life)
IC Driver
IK Rating :- IK08  
Solar Panel 9v / 3.5W Monocrystalline Solar Panel (11Wp front + 9Wp back) - Expected life 20 Years.
Charging Time - 10 hours of sunshine to full charge  Working Temperature -20ºC ~ 60ºC
Weight 4.5kg (excluding mounting accessories)
Materials Die-cast Aluminium, Tempered Glass.
Mounting Options  - 4 - fin aluminium ground spike or Surface Mount
Dimensions Height = 800mm x 220mm x 90mm. Solar Panel 486mm x 186mm  
Warranty 5 Years
Colour finish - Graphite Black.

MOUNTING

Multiple mounting options come with this PIR Solar Path Light. The removable, internal mount secures directly onto any flat surface. It also mounts onto concrete with the supplied anchor bolts. In addition, two substantial aluminium 4 fin ground spikes allow mounting into soft ground. These ground spikes simply attach to the internal surface mount.


Specifications
Bollard Height 800mm
Colour Black
IP Rating IP65
Colour Temperature 6000K
Materials Aluminium
Warranty 3 Years
Watts 20W
Width 220mm

PRODUCT AFTERCARE

Although each of our light fittings come with a warranty, it is also important to take care for your product after installation. The outdoor environment can be harsh with very warm and hot conditions as well as extremely cold, wet, and windy conditions and more especially in coastal areas where the salt air is more concentrated causing corrosion. By neglecting to care for your product may void any warranties. Below is information on caring for the different type of products we sell.

COPPER, BRASS & BRONZE

Brass and Bronzes are families of copper-based alloys and mainly copper and zinc. Bronzes are mainly copper along with alloying elements such as tin, aluminium, silicon, or beryllium. Brass generally has a bright gold appearance dependent upon the percentage of copper yields, the higher the percentage the rosier the tone will be, and more zinc will make it appear silvery. Brass has higher malleability than bronze or zinc and is ideal for resisting corrosion including galvanic corrosion from saltwater. Copper products start off with a shiny orange appearance and once installed copper weathers naturally to a lovely blue-green colour or patina over time. In arid climates, the colour change is usually to a nut brown. The colour change is the result of surface oxidation caused mainly by moisture and corrosive elements in the atmosphere. Unlike rust oxidation, the copper patina is a protective barrier that retards further corrosion, to maintain copper’s long life. They are ideal for coastal areas and to keep them looking pristine we recommend cleaning copper surfaces periodically with a solution of salt and vinegar to remove any excess deposits. Simply dissolve salt in vinegar, then use a soft cloth to apply the liquid solution to the surface of the fitting then buff until you see the copper begin to shine. Rinse and dry. The ‘Brasso’ product is a metal polish designed to remove deposits from brass, copper, chrome, and stainless steel. WD 40 is also useful for cleaning brass too and wipe off with soapy water.

316L & 316 STAINLESS STEEL

The highest grade of Stainless Steel we use is 316L Marine Grade Stainless Steel which is a low carbon version of 316 Stainless Steel (which is why it has L after the 316). These grades of Stainless Steel are popular for use in Coastal areas due to the materials immunity from boundary carbide precipitation (sensitisation). However, 316 Stainless Steel contains more carbon and although is still corrosion resistant it does still need care to remove the deposits that build up on the surface or the corrosion will eventually start to build up on the surface. We sell more 316 than 316L products on this website. The elements of 316L and 316 Stainless Steel are Carbon, Manganese, Phosphorous, Sulphur, Silicon, Chromium, Nickel, Molybdenum, Nitrogen, and Iron. The only difference is that 316L has 0.03 max % of Carbon and 316 has 0.8 max % of carbon. To maintain the shiny clean surface of 316L and 316 Stainless Steel we recommend the use of Stainless-Steel cleaning products or a solution of lemon juice and baking powder and wiped off with soapy water.

304 STAINLESS STEEL

304 Stainless Steel is made up of Carbon, Manganese, Phosphorous, Sulphur, Silicon, Chromium, Nickel, Nitrogen, and Iron. There is no presence of Molybdenum the anti-corrosive element and this metal has a high carbon content too. Therefore, we would not recommend this metal used in coastal areas. Again, it can be cleaned with Stainless Steel cleaning products or a solution of lemon juice and baking powder and wiped off with soapy water. In addition, we would suggest using an anti-corrosive spray such as ACF-50 which forms a clear film onto the surface of the fittings and adds protection to the surface for up to six months. We sell this on our website. /product/corrosion-block-anti-corrosion-formula-946ml-bottle-with-trigger-spray

201 STAINLESS STEEL

201 Stainless Steel is made up of Carbon, Manganese, Phosphorous, Sulphur, Silicon, Chromium, Nickel, Nitrogen, and Iron. It contains half the nickel and more manganese and nitrogen than the other popular steels. It is also the least expensive of the steel metals we sell. This mid-range product is prone to corrosion such as salt water and not suitable for coastal areas. Again, it can be cleaned with Stainless Steel cleaning products or a solution of lemon juice and baking powder. In addition, we would suggest using an anti-corrosive spray such as ACF-50 which forms a clear film onto the surface of the fittings and adds protection to the surface for up to six months. We sell this on our website. /product/corrosion-block-anti-corrosion-formula-946ml-bottle-with-trigger-spray

TEAK WOOD

Our Teak lighting use timber from a sustainable source, organically oiled during production to enhance and protect the grain. The teak bollards for example are made from a natural raw material which reacts to temperature changes and will naturally release sap or may sweat inside the protective packaging. So, please don’t be alarmed if you notice this when you unpack the bollards from their packaging. Once installed, they will weather naturally in the garden, although further oil, stain or varnish treatments are recommended periodically to preserve the beauty of these products. This should also help prevent the build-up of mildew and drying out from the sun. Teak Sealer and Teak oil can be purchased from many timber and DIY stores. They are suitable for all areas including coastal areas.

ALUMINIUM

Many of our products are made from aluminium which is formed of aluminium oxide in an ore called bauxite. Alumina and bauxite are the two main raw materials in the aluminium making process. Aluminium is obtained by the electrolysis of alumina which extracts pure aluminium metal from alumina. Aluminium will not rust however it does suffer from oxidation and is prone to corrosion. We would not recommend Aluminium products in coastal areas. To maintain the surface of the product you can clean with a solution of vinegar and water and rinse with soapy water. Again, our ACF-50 anti-corrosive spray will provide a clear protective coating to the surface of the fittings and can offer up to six months protection. /product/corrosion-block-anti-corrosion-formula-946ml-bottle-with-trigger-spray

POWDER COATED FINISHES

Many of our coloured finished products have been powder coated onto aluminium. This is a technique to apply decorative and protective finishes to aluminium through a process that electrostatically charges the powder consisting of a mixture of finely milled resin and pigment, spraying it on to the aluminium surface as a baking process. Although they look effective, please bear in mind that the powder is a paint and in coastal areas the paint can peel and expose the aluminium to corrosion. Therefore, we would not recommend powder coated aluminium fittings in coastal areas. To clean the surface simply use soapy water and a soft cloth and do not use anything abrasive as this will damage the finish. Again, our ACF-50 anti-corrosive spray will provide a clear protective coating to the surface of the fittings and can offer up to six months protection. /product/corrosion-block-anti-corrosion-formula-946ml-bottle-with-trigger-spray

ANODISED PAINT FINISH

Anodised coloured paint finishes give a lustre shiny finish to the surface of aluminium fittings and this is done by dipping the aluminium component into an acid electrolyte bath and applying an electric current to the liquid using a cathode. This causes oxygen ions within the aluminium to be released, which then combine with the aluminium atoms on the surface of the component to create the anodic oxide finish. This process gives the metal surface a porous structure, which can then be coloured with dyes and sealed afterwards. The advantage of the anodised finish is that it is not applied on the surface of the metal, instead, it is integrated with the aluminium substrate, which means it does not peel or chip like paint. The beauty of anodising is that it does not come off and it should protect the aluminium depending upon the thickness for at least 5 years and therefore reduce corrosion occurring. If used in coastal areas, we would recommend they are cleaned regularly with soapy water. Again, our ACF-50 anti-corrosive spray will provide a clear protective coating to the surface of the fittings and can offer up to six months protection.  /product/corrosion-block-anti-corrosion-formula-946ml-bottle-with-trigger-spray

POLYCARBONATE (PC) –PLASTIC

Polycarbonate is a durable thermoplastic material with high impact resistance. It is quite light in weight and used primarily for Amenity style light fittings. It is fine for use in all areas including the coast. It should be cleaned periodically with warm soapy water to remove any deposits that have accumulated over time.

FeCSI-Steel

The element Iron (Fe) used in conjunction with steel alloys is put together to produce a product that eliminates the need for painting, and which forms a stable rust-like appearance after several years’ exposure to the weather. This product is used in some of our bollards under our ‘Rustic Bollard’ Category. They are very heavy and robust fittings. The surface oxidation of weathering steel takes approximately six months. When first purchased some residue rust colour from the manufactured product may be visible and will wash away with the elements of the weather. Over time they will naturally give a rust effect appearance and you will be able to touch them without any rust residue staining. An example of this is shown on our website for the ‘Rusty Slot’ fitting. They are ideal for all areas including the coast.

GRANITE

Granite is a coarse-grained igneous rock composed mostly of quartz, alkali feldspar and plagioclase. It is a hard semi-porous rock which is resistant to heat and cold. Ideal for any area, however salt deposits in coastal areas will accumulate onto the surface of the rock so it is advisable to clean the surface with warm soapy water periodically. Do not use anything abrasive.

Back to top