01689 606342

QuadMarka - 240v 316 Stainless Steel GU10 IP67 Recessed Light 4 Windows 360 Degree Of Light


The QuadMarka is a 240v 4 way recessed light ideal for edging and highlighting areas of the garden such as decking, steps, patio areas, and even driveways. It can be mounted directly into the ground, or into materials including wood, brick, slabs and walls. Made from 316 stainless steel (marine grade), it is highly durable with a strong resistance to pitting and rusting, even in particularly damp surroundings. The top of this multi directional light is segmented into four conical sections allowing 360ยบ diffusion of light through a clear lens, without glare. The slightly domed surface makes this the ideal shape for mounting on decking, edge of a driveway, a patio or any other areas where a walk over facility is required but not to be driven over. The front bezel attaches to the steel body with a simple screwing method. This means no tools are required. in order to change the lamp. We recommend the use of a LED GU10 with the QuadMarka. 

This fitting is available in Brass and Copper too in both 12v and 240v along with the 12v version in Stainless Steel.  Codes,

The robust black plastic sleeve will be built into the wall during construction or retrofitted into a hole. The main part of the light then pushes into the tube, where it is held firmly in place by internal gripping ‘teeth’ (see detailed image), just showing the streamline front dome.

The QuadMarka is supplied with approx. 3m of 3 core H05RNF cable. This longer cable length gives the option of a 6m space between two lights should it be needed, and could cut down the number of cable joins in outdoor lighting installation. Light can also be spread to a wider area with longer cable length.

Please note: This fitting must be installed with the mounting sleeve and additional rubber seal. If the sleeving and seal is not used, the Guarantee will be void. Not for use in areas prone to water-logging or flooding.

CARE OF STAINLESS STEEL – TIPS

Contrary to popular belief, Stainless steel needs looking after; especially in exposed and coastal areas. If not cleaning on a regular basis, the acid that is ever present in the air ( and salt in coastal areas) will affect the surface causing pitting and even rust like staining (known as ‘Tea staining’ ) to appear.

To keep your lights looking good, simply wipe clean the outside with a damp cloth and then dry once a month, (more frequently in coastal areas). Specialist stainless steel cleaning products can be used (We recommend and stock ‘Kilrock stainless steel cleaner’) but never use an ABRASIVE cleaner. In extreme conditions we recommend applying 2 coats of Clear lacquer to protect the steel surface. (We recommend and stock ‘Simoniz’ clear lacquer).

 240v IN-GROUND LIGHTS 

240v fittings can be affected by damp conditions, typically when located outdoors. When a fitting is located outside in the cold air combined with the heat produced by the lamp inside, it is inevitable that condensation will occur, just as it does on bedroom windows in the home. If too much condensation is produced, this could result in the fitting tripping, especially in these types of fittings where a drainage hole is not possible. To combat this, we include silica gel with all  Quadmarka 240v in-ground lights to soak up any excess moisture – these should not be removed but replaced periodically and fittings checked. If any water is sitting in the fitting, this should be tipped out and the fitting safely dried out. Condensation can be more prominent when the fitting has been opened on a damp day, as the damp air will then be trapped inside when re-sealed. Therefore it is recommended that any maintenance, including changing bulbs, is performed on a dry day. An additional practice to be put in place is to apply Lithium Grease to the bulb holder / bulb which acts as an additional seal to prevent tripping. Although this prevents tripping, the fittings will still need to be checked and dried out should water sit inside the fitting. For extra protection, the Quadmarka can also be filled with Wiska Gel (electrical insulation).

                                                 

Item Specifications

Beam Angle: 360 degree 4 slots
colour: stainless steel 316
Voltage: 220 - 240v
Max wattage: 35W
IP rating: IP 67
Height: 130mm
Finish: 316 stainless steel
Material: 316 Stainless Steel / Steel / Durable Plastic
Bulb Type: GU10
cabling: 3 metres of H05RNF cable 0.75mm
mounting: Mounting Hole Size: 70mm + 2 x 9mm overlap
Bezel: 87.7mm diameter
Warranty: 2 Years, 1 year warranty period for cable