Solar LED Path/Lawn/Garden light with PIR IP65 sold as a set of 2. Black finish
Our latest solar path/lawn garden spike light with integral PIR function. They come as a set of 2 fittings and each fitting comes in 4 sections enabling you to control the height of illumination.
They are made from black ABS plastic and the IP rating is IP65. Protected against jets of water. 0.7w and detection angle 120 degrees and a range of 3 - 5 metres.
The solar panel is on the top of the fitting with the LED chip located inside the reflector below. The fitting has a PIR sensor located below the reflector and you can simply connect the head to the two connecting pipes and finally onto the spike mount which goes into the ground/lawn area.
You can also simply switch the solar fitting on and off from a switch under the head of the solar fitting.
This smart solar path light will act as a dusk to dawn fitting providing a low level of light from the reflector. At night once it detects you within the 3 - 5 metre range it will go to full brightness and remain so all the time you are within range. With no further activity it will go down to low level light after approximately 22 seconds.
The charging time is approximately 6 - 8 hours and working time is 10 - 12 hours (bright light) and 100 - 120 hours (low light).
Product size is 106mm diameter, with maximum height of 618.5mm.
The solar panel is 6v/0.7w with a 0.5w LED light source in a day light white colour temperature 4000k.
It has a 3.7v 1500mAh lithium battery and we offer a 2 year warranty on these fittings.
For the first time charge the product under sunlight and likewise if not used for some time repeat this process to charge up the lithium battery.
They should be located in a southerly position to obtain maximum sun exposure.
Please note that if there are several days of overcast weather they may not illuminate all night. Solar fittings rely on the level of sunlight they receive.
Lamp colour ( Kelvins )
The colour of a lamp is defined as a measurement called kelvins. A standard GLS light bulb in your house would be 2,700 kelvins
which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum. Getting
the right colour temperature of a lamp does matter as the warm colour wavelength helps to soften the tone of the area
and gives a warm soft relaxed feel and ideal for colourful flower beds and rockery areas especially with wooden bark
and at the other end of the scale a 4,000 to 5,000 kelvin lamp colour would be used against a light background such as
white walls or to accentuate grey blueish foliage in shrubs and small trees. When you buy a new, energy efficient
bulb, keep your application and colour scheme in mind and make sure to buy the bulb with a colour
temperature to match.