01689 606342


Tango - 240v - 304 Brushed Stainless Steel IP44 E27 Max 9.2w Wall Light - Lantern Light


The Tango range of exterior garden lights has a modern design providing the perfect complement to any outdoor space. The wall light is diffused to minimize glare with the internal stainless louvre and scatter light out over all areas ideal for entrance porches. There are also two bollard lights codes 13922 and 13923 to choose from to match with the wall light and keep a consistent theme in your lighting. Made from 304 brushed stainless steel and with a clear outer lens for ease of cleaning. The Tango range is designed to be very low glare and sympathetic to the environment. The design of the louvre pushes the light down to where it is needed most. Lamp not included. See bottom of screen for lamp options. Ideally use a candle style LED lamp which is narrower than the standard GLS type.

Lamp colour ( Kelvins )
 

The colour of a lamp is defined as a measurement called kelvins. A standard GLS incandescent bulb in the home would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum.

                                                                 Installation 220 – 240v

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay-based soil areas. If possible, use ground surface spike lights rather than a buried light.  Mains 240v cable will have less joints than a low voltage installation but care must be taken with the cable runs. Cabling should be Rubber Butyl and not PVC. PVC leads to capillary action over time especially with UV degradation.

All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.                      

 

Item Specifications

colour: stainless steel
Weight: 0.8kg
Voltage: 240V
Max wattage: 9.2w
IP rating: IP 44
Materials: stainless steel
Finish: Brushed stainless steel & clear PC
Dimensions: 260mm height x 160mm projection x 102mm width
Material Finish: Stainless Steel 304
Bulb Type: E27
Warranty: 2 Years