The Odyssey range gives a stunning designer look at an affordable price to your garden lighting. The odyssey is one of our most popular range of wall lights due to their flexibility, quality and price. This white powder coated aluminium fully adjustable exterior light offers the best in design used with a mains GU10 LED cool white or warm white lamp. If you are near a coast we would recommend a 316 stainless steel product, copper or brass not powder coated aluminium products. Due to the corrosion caused by salt in the air.
Lamp colour is denoted in Kelvins and the lower the number the warmer the lamp for example 2700k is warm white and 6500k would be very cool white.
All outdoor lighting should be installed by a certified PART P, NIC EIC electrical contractor to ensure a safe and water tight installation.
Choosing the style of a product is only part of the equation you must also think
of where that product will be used and how it will be installed. All exterior lighting
products on our web site have a IP rating which is explained further in our design
ideas section but in simple terms the IP rating is appropriate to each light fitting
and its intended application and is therefore fit for purpose. Water ingress is the
enemy for outdoor lighting and the products supplied are only as good as the installation
as the weakest point is always cable and transformer joints. All joint must be made
100% water tight and this can be done using heat shrink kits, waterproof junction
boxes which are then filled with a resin mix. All joints where possible should be
made above ground for easy access and reduced water ingress. When installing ground
buried lights adequate drainage systems should be put in place especially in clay
based soil areas. If possible use ground surface spike lights rather than a buried
light. Mains 240v cable will have less joint than a low voltage installation
but care must be taken with the cable runs.
The colour of a lamp is defined as a measurement called kelvins. A standard GLS
light bulb in your house would be 2,700 kelvins which is in the warm colour spectrum
and a lamp with 6,000 kelvins would be at the very cold white spectrum. Getting the
right colour temperature of a lamp does matter as the warm colour wavelength helps
to soften skin tones and gives a warm soft relaxed feel and at the other end of the
scale a 4,000 to 6,000 kelvin lamp colour would be used in offices or a fast
food restaurants to make you feel less comfortable and relaxed and more alert. There’s
nothing that can sour your opinion of a compact fluorescent or LED lamp like
buying a 4000K or 5000K bulb when you meant to buy a 2700K bulb, or vice-versa. When
you buy a new, energy efficient bulb, keep your application and colour scheme in mind
and make sure to buy the bulb with a colour temperature to match.
|IP rating:||IP 44|
|Finish:||Gloss white paint & clear glass|
|Material Finish:||Aluminium / Glass|