Also refer to technical help page
Care must be taken when installing exterior lighting products especially those that are ground mounted. All the products are sold and tested fit for purpose and the IP rating is set according to the design and purpose of the luminaire, more details on IP ratings can be found under design ideas section. The weakest point is generally the installation of the product where adequate drainage has not been made for ground buried lights or poor cable joints have been made which are not 100% water tight and will allow for water penetration. There are a number of waterproof enclosures available on this site along with heat shrink cable joint kits and resin gel packs to fill the junction boxes to make a watertight enclosure. Where possible try and keep all joints and transformers above ground, however if this is not possible there are potted burial kits available.
More information in the technical help page
Lamp colour is determined by Kelvins and a lamp which has 2,700 kelvin is classed as warm white and sympathetic to skin tones and warm brickwork etc. A kelvin of 6,500k is in the blueish white spectrum and works well against a white background and will appear brighter to the naked eye than the warm colour spectrum.
|Colour:||White, Anthracite, Grey|
|Dimensions:||225mm H x 70mm W x 75mm D|