01689 606342

    Traditional Half Lantern - 240v - Satin Black Die Cast Aluminium IP44 E27 Max 60w Wall Light - Lantern Light

This Traditional half lantern wall mounted light is designed to be practical and aesthetically pleasing and to suit the older traditional styled property.

Ideal for courtyard illumination or mounted on horse stable blocks. The clear lens allows the light to be thrown in all directions without restriction.
Fitted with an E27 (Edison screw) lamp holder you can use a variety of LED GLS style lamps. Examples are given at the bottom of the page for 'Related Products'.

There is a PIR version of this lantern using code 1818S-PIR.

Lamp colour ( Kelvins )

The colour of a lamp is defined as a measurement called kelvins. A standard GLS incandescent bulb in the home would be 2,700 kelvins which is in the warm colour spectrum and a lamp with 5,000 kelvins would be at the very cold white spectrum.

                                                                 Installation 220 – 240v

Choosing the style of a product is only part of the equation you must also think of where that product will be used and how it will be installed. All exterior lighting products on our web site have an IP rating appropriate to each light fitting and its intended application and is therefore fit for purpose. Water ingress is the enemy for outdoor lighting and the products supplied are only as good as the installation. The weakest point is always cable joints. All joints must be made 100% watertight and this can be done using IP68 cable connectors and/or waterproof junction boxes which are then filled with a re-enterable liquid gel mix. All joints where possible should be made above ground for easy access and reduced water ingress. When installing ground buried lights adequate drainage systems should be put in place especially in clay-based soil areas. If possible, use ground surface spike lights rather than a buried light.  Mains 240v cable will have less joints than a low voltage installation but care must be taken with the cable runs. Cabling should be Rubber Butyl and not PVC. PVC leads to capillary action over time especially with UV degradation.

All exterior lights must be installed by a certified NIC EIC electrician and should be signed off by an electrician with Part P certification. There are a selection of waterproof jointing kits and boxes available on this web site.               


Item Specifications

colour: Black
Weight: 1.4kg
Voltage: 240V
Materials: aluminium
Dimensions: Proj: 128mm H: 400mm W: 215mm
Dimmable: Dimmable
Sensor: PIR, None
Material Finish: Satin black paint & clear pc
Bulb Type: E27
Warranty: 2 Years