01689 606342

Ikon Pro 12v DC - 25mm Kit IP67 0.75w SW RGB Recessed - 304 Polished Stainless Steel


The Ikon PRO extends the Ikon recessed decking kit range, with its unique design of removable and interchangeable heads. The new Fresnel lenses improve lumen output, diffusing the spread of light evenly. Designed to be fitted and wired during the decking build stage without the heads. The supplied rubber caps protect the fitting from the elements until the decking is complete. Each individual IP67 head easily connects and can be placed into position quickly, adding the final touches to the decking design. There are three head sizes to choose from for the RGB kit.

The kit comprises of 10 x 0.75w 25mm LED deck lights with a dimmable RGB remote control.  The LED's are super bright SMD (Surface Mounted Diode's),

There is a 15w driver (transformer) 5m extension cable, 2 x 5 way looms and a 3 pin UK plug.

Each loom is 1.5m long to connect to the next deck light.

  • Suitable for indoor or outdoor use
  • Dimmable
  • Supplied with remote RGB control
  • Polished stainless steel & clear pc
  • Constructed from stainless steel (304) & polycarbonate
  • Super bright SMD LED technology
  • Innovative new fitting method
  • Improved lens design
  • Complete with LED driver
  • 10 x 0.75W LED module (SMD 5050) RGB (Included)
  • RGB
  • IP67
  • Proj: 0mm Dia: 25mm
  • Minimum installation depth : 80mm
  • Class 3
  • Cut hole Diameter : 20mm
  • 2+3YR Extended Warranty
  • Weight: 1.3 Kg
  • Cable length 3m
  • Battery spec: 23A 12v.
  • Driver type: 12v Constant Voltage
  • Lamp life:  approximately 25,000 hours.

Fitting the Ikon Pro
Step 1 - Drill hole to the correct size
Step 2 - From below, push the wiring loom through the hole (without head)
Step 3 - Place weather protective cap onto the socket

Once the decking is complete
Step 4 - Place the LED heads onto the loom
Step 5 - Let the cap fall through the hole & firmly push the head into place. Repeat for all heads
Step 6 - Push the plug in and switch on to test.

This product is operated by a small RF remote control. It has a maximum range of 10m, though this can be affected by walls and other solid objects The remote control has four buttons. One turns the unit on and off. One allows you to step through the colours in the following sequence; yellow, white, red, green, blue, purple and light blue. The next press will make the controller step through all the colours, and another press of the button, will move through the colours gradually. The other two buttons allow you to set the brightness of the LEDs as required
The Ikon Pro RGB ground light kit contains: 1 x 12V outdoor inline transformer with 2 metre extension lead, 10 x IP44 LED light fittings each with 1.5 (1.2 & 0.3) metres of cable, 1 x RF controller and 1 x 12V type 23A battery.

Max of 10 metre range for the remote control
Not suitable to be used with timers or PIR sensors


Item Specifications

colour: Polished stainless steel (304) & clear polycarbonate
Cut out: 20mm
Weight: 1.13kg
Voltage: 12V dc
IP rating: IP 67
Materials: stainless steel 304
Material Finish: Stainless Steel 304
Bulb Type: integral LED
diameter: 25mm
colour temperature: RGB (Colour change)
Warranty: 2 Years