Lumify USB Solar Vintage Bulb Lights - Set Of 10

Add vintage festoon bulb lighting anywhere outside quickly and easily with our premium grade Lumify USB Solar Vintage Bulb Lights. The set consists of 10 bulbs that each contain 4 vintage warm white micro LEDs. The bulbs are spaced 80cm apart along a 7.2m string with an additional 1.9m between the control tube and the first bulb.   

Lumify uses high efficiency circuit design backed up with enhanced USB charging and new Power saving technology to guarantee unrivalled performance night after night, year after year.

Innovative Tube Design

Water ingress is one of the main reasons solar lights fail. Lumify festoon lights use an innovative new tube design which guarantees unrivalled waterproofing. The battery compartment, power switch, mode switch and USB charging port are all protected under an O-ring sealed screw cap which offers bottle-tight waterproofing. Both the solar panel and LED string are connected into the base of the tube using O-ring sealed valve connectors so there are no weak points.

Slick Solar Panel Design

Lumify's slick solar panel is just 8mm thick and uses thermally toughened ultra-clear tempered glass to seal the Lumify solar cells which maximises transmission efficiency and is guaranteed not to cloud over time. Clouding is common on cheap and mid-range solar lights and is one of the main reasons they deteriorate within a year or two. Lumify solar panels also offer a high degree of frost resistance which means they will clear quickly on those chilly winter mornings allowing them to soak up all available winter sun throughout the day. Lumify solar panels come with stake and wall mounting options included and can be angled up and down as well as tilted left and right.

Easily Replaceable Lithium Ion Battery

Lumify uses a single high powered 18650 rechargeable Lithium Ion battery (included) which have become the battery of choice for high-end electronics manufacturers. These high powered state-of-the-art batteries will offer years of hassle free use and can be replaced quickly and easily at any point in the future.

Power saving Mode

Power saving mode is for those that don't have a great solar panel location available and aren't able to USB charge. Lumify's advanced Power saving mode reduces brightness slightly which doubles the runtime of the lights.

Enhanced USB Charging

 Lumify's unique high-efficiency circuit design takes USB charge to a new level. Lumify solar festoon lights can work for 6 nights in a row from a single 4 hour USB charge with only a little help from the sun - this can be extended to 12 days if you use Power saving mode.

Remote Solar Panel

Years of selling and designing solar lights have taught us that solar lights with separate solar panels always perform better. Lumify is a 3 piece system consisting of the solar panel, control tube and light string. The solar panel is connected to control tube by a 2m cable and there is 2m of cable between the control tube and the first LED bulb on the light string. This means that you can get your solar panel in a great location (the higher up the better) but still have your control tube within easy reach.

Indoor and outdoor

Lumify have been designed to be used outdoors where they will withstand everything the British weather can throw at them, but that doesn't mean you can't use them indoors too! Simply remove the battery, disconnect the solar panel and plug them in to a USB charging source where they can operate indoors like normal mains powered lights.

Disconnectable Solar Panel and string Light String

Lumify have been carefully designed to ensure that both the solar panel and string light string can be disconnected from the control tube quickly and easily so you can leave your lights and solar panel in situ if you ever need to take the control tube inside to charge it by USB.

8 Lighting Modes

Lumify has 8 lighting modes including all sorts of flashing and alternating sequences as well as steady on where all lights stay on all the time with no flashing. Steady on is by far the most popular mode among our own customers so we have made this mode the first mode and the default mode on Lumify. Once you have selected your favourite mode Lumify will remember that setting and light up in that mode automatically each night.

Fully Automatic

Lumify USB solar festoon lights are fully automatic so once you have set them up, turned them on and selected your favourite mode they will light up at dusk and turn off at dawn automatically. There is an on/off switch in the control tube so you can turn them off at any point. Lumify will continue to charge when turned off using the switch in the control tube, but they wont come on again until you turn them back on at the switch.
   

PRODUCT AFTERCARE

Although each of our light fittings come with a warranty, it is also important to take care for your product after installation. The outdoor environment can be harsh with very warm and hot conditions as well as extremely cold, wet, and windy conditions and more especially in coastal areas where the salt air is more concentrated causing corrosion. By neglecting to care for your product may void any warranties. Below is information on caring for the different type of products we sell.

COPPER, BRASS & BRONZE

Brass and Bronzes are families of copper-based alloys and mainly copper and zinc. Bronzes are mainly copper along with alloying elements such as tin, aluminium, silicon, or beryllium. Brass generally has a bright gold appearance dependent upon the percentage of copper yields, the higher the percentage the rosier the tone will be, and more zinc will make it appear silvery. Brass has higher malleability than bronze or zinc and is ideal for resisting corrosion including galvanic corrosion from saltwater. Copper products start off with a shiny orange appearance and once installed copper weathers naturally to a lovely blue-green colour or patina over time. In arid climates, the colour change is usually to a nut brown. The colour change is the result of surface oxidation caused mainly by moisture and corrosive elements in the atmosphere. Unlike rust oxidation, the copper patina is a protective barrier that retards further corrosion, to maintain copper’s long life. They are ideal for coastal areas and to keep them looking pristine we recommend cleaning copper surfaces periodically with a solution of salt and vinegar to remove any excess deposits. Simply dissolve salt in vinegar, then use a soft cloth to apply the liquid solution to the surface of the fitting then buff until you see the copper begin to shine. Rinse and dry. The ‘Brasso’ product is a metal polish designed to remove deposits from brass, copper, chrome, and stainless steel. WD 40 is also useful for cleaning brass too and wipe off with soapy water.

316L & 316 STAINLESS STEEL

The highest grade of Stainless Steel we use is 316L Marine Grade Stainless Steel which is a low carbon version of 316 Stainless Steel (which is why it has L after the 316). These grades of Stainless Steel are popular for use in Coastal areas due to the materials immunity from boundary carbide precipitation (sensitisation). However, 316 Stainless Steel contains more carbon and although is still corrosion resistant it does still need care to remove the deposits that build up on the surface or the corrosion will eventually start to build up on the surface. We sell more 316 than 316L products on this website. The elements of 316L and 316 Stainless Steel are Carbon, Manganese, Phosphorous, Sulphur, Silicon, Chromium, Nickel, Molybdenum, Nitrogen, and Iron. The only difference is that 316L has 0.03 max % of Carbon and 316 has 0.8 max % of carbon. To maintain the shiny clean surface of 316L and 316 Stainless Steel we recommend the use of Stainless-Steel cleaning products or a solution of lemon juice and baking powder and wiped off with soapy water.

304 STAINLESS STEEL

304 Stainless Steel is made up of Carbon, Manganese, Phosphorous, Sulphur, Silicon, Chromium, Nickel, Nitrogen, and Iron. There is no presence of Molybdenum the anti-corrosive element and this metal has a high carbon content too. Therefore, we would not recommend this metal used in coastal areas. Again, it can be cleaned with Stainless Steel cleaning products or a solution of lemon juice and baking powder and wiped off with soapy water. In addition, we would suggest using an anti-corrosive spray such as ACF-50 which forms a clear film onto the surface of the fittings and adds protection to the surface for up to six months. We sell this on our website. /product/corrosion-block-anti-corrosion-formula-946ml-bottle-with-trigger-spray

201 STAINLESS STEEL

201 Stainless Steel is made up of Carbon, Manganese, Phosphorous, Sulphur, Silicon, Chromium, Nickel, Nitrogen, and Iron. It contains half the nickel and more manganese and nitrogen than the other popular steels. It is also the least expensive of the steel metals we sell. This mid-range product is prone to corrosion such as salt water and not suitable for coastal areas. Again, it can be cleaned with Stainless Steel cleaning products or a solution of lemon juice and baking powder. In addition, we would suggest using an anti-corrosive spray such as ACF-50 which forms a clear film onto the surface of the fittings and adds protection to the surface for up to six months. We sell this on our website. /product/corrosion-block-anti-corrosion-formula-946ml-bottle-with-trigger-spray

TEAK WOOD

Our Teak lighting use timber from a sustainable source, organically oiled during production to enhance and protect the grain. The teak bollards for example are made from a natural raw material which reacts to temperature changes and will naturally release sap or may sweat inside the protective packaging. So, please don’t be alarmed if you notice this when you unpack the bollards from their packaging. Once installed, they will weather naturally in the garden, although further oil, stain or varnish treatments are recommended periodically to preserve the beauty of these products. This should also help prevent the build-up of mildew and drying out from the sun. Teak Sealer and Teak oil can be purchased from many timber and DIY stores. They are suitable for all areas including coastal areas.

ALUMINIUM

Many of our products are made from aluminium which is formed of aluminium oxide in an ore called bauxite. Alumina and bauxite are the two main raw materials in the aluminium making process. Aluminium is obtained by the electrolysis of alumina which extracts pure aluminium metal from alumina. Aluminium will not rust however it does suffer from oxidation and is prone to corrosion. We would not recommend Aluminium products in coastal areas. To maintain the surface of the product you can clean with a solution of vinegar and water and rinse with soapy water. Again, our ACF-50 anti-corrosive spray will provide a clear protective coating to the surface of the fittings and can offer up to six months protection. /product/corrosion-block-anti-corrosion-formula-946ml-bottle-with-trigger-spray

POWDER COATED FINISHES

Many of our coloured finished products have been powder coated onto aluminium. This is a technique to apply decorative and protective finishes to aluminium through a process that electrostatically charges the powder consisting of a mixture of finely milled resin and pigment, spraying it on to the aluminium surface as a baking process. Although they look effective, please bear in mind that the powder is a paint and in coastal areas the paint can peel and expose the aluminium to corrosion. Therefore, we would not recommend powder coated aluminium fittings in coastal areas. To clean the surface simply use soapy water and a soft cloth and do not use anything abrasive as this will damage the finish. Again, our ACF-50 anti-corrosive spray will provide a clear protective coating to the surface of the fittings and can offer up to six months protection. /product/corrosion-block-anti-corrosion-formula-946ml-bottle-with-trigger-spray

ANODISED PAINT FINISH

Anodised coloured paint finishes give a lustre shiny finish to the surface of aluminium fittings and this is done by dipping the aluminium component into an acid electrolyte bath and applying an electric current to the liquid using a cathode. This causes oxygen ions within the aluminium to be released, which then combine with the aluminium atoms on the surface of the component to create the anodic oxide finish. This process gives the metal surface a porous structure, which can then be coloured with dyes and sealed afterwards. The advantage of the anodised finish is that it is not applied on the surface of the metal, instead, it is integrated with the aluminium substrate, which means it does not peel or chip like paint. The beauty of anodising is that it does not come off and it should protect the aluminium depending upon the thickness for at least 5 years and therefore reduce corrosion occurring. If used in coastal areas, we would recommend they are cleaned regularly with soapy water. Again, our ACF-50 anti-corrosive spray will provide a clear protective coating to the surface of the fittings and can offer up to six months protection.  /product/corrosion-block-anti-corrosion-formula-946ml-bottle-with-trigger-spray

POLYCARBONATE (PC) –PLASTIC

Polycarbonate is a durable thermoplastic material with high impact resistance. It is quite light in weight and used primarily for Amenity style light fittings. It is fine for use in all areas including the coast. It should be cleaned periodically with warm soapy water to remove any deposits that have accumulated over time.

FeCSI-Steel

The element Iron (Fe) used in conjunction with steel alloys is put together to produce a product that eliminates the need for painting, and which forms a stable rust-like appearance after several years’ exposure to the weather. This product is used in some of our bollards under our ‘Rustic Bollard’ Category. They are very heavy and robust fittings. The surface oxidation of weathering steel takes approximately six months. When first purchased some residue rust colour from the manufactured product may be visible and will wash away with the elements of the weather. Over time they will naturally give a rust effect appearance and you will be able to touch them without any rust residue staining. An example of this is shown on our website for the ‘Rusty Slot’ fitting. They are ideal for all areas including the coast.

GRANITE

Granite is a coarse-grained igneous rock composed mostly of quartz, alkali feldspar and plagioclase. It is a hard semi-porous rock which is resistant to heat and cold. Ideal for any area, however salt deposits in coastal areas will accumulate onto the surface of the rock so it is advisable to clean the surface with warm soapy water periodically. Do not use anything abrasive.