The tubular metal spotlight body is mounted on an adjustable knuckle joint and 75mm diameter enclosed mounting base with
back plate, grommeted rear cable entry and connection terminals. Unscrewing the front bezel makes it easy to extract
and change the lamp without tools .
Screw back plate onto wall, post or Besa box. Seal wall fixing holes with silicon sealant. Mount spotlight base onto
to back plate with grub screw fixings allowing rotation of the body to achieve full “pan and tilt” adjustment.
Lamp colour is determined by the Kelvins and a lamp which is 2,700 kelvin is classed as warm white and sympathetic to skin tones and warm colours like red brickwork or yellows etc. A lamp with a kelvin rating of kelvin of 6,500k is in the blueish white spectrum and works well against a white background and cooler colour brick work and will appear brighter to the naked eye than the warm colour spectrum. Plants and shrubs work better with a warm spectrum from 2,700k up to 4,000k max.
Please ensure that you use a PART P, NIC EIC electrical contractor to install your exterior lighting.
All the products are sold and tested fit for purpose and the IP rating is set according to the design and purpose of the
luminaire, more details on IP ratings can be found under design ideas section. The weakest point is generally the installation
of the product where poor cable joints have been made which are not 100% water tight and will allow for water penetration.
There are a number of waterproof enclosures available on this site along with IP68 inline connectors and resin gel packs
to fill the junction boxes to make a watertight enclosure. Copper grease should also be used on screws and nuts to stop
them binding and ease removal at a later date when a lamp change is required it can also provide a watertight seal. Never
use PVC cabling only use Rubber. PVC can lead to capillary action.
|Colour:||Silver, Brown, Black|
|Dimensions:||92mm x 63mm|